FAUN VIAJET 6
Your universal tool
With its wide range of equipment and combination options, the VIAJET 6 can be customised to suit almost any application. The VIAJET 6 is equipped with the patented FAUN air recirculation system as standard, which guarantees the best emission values in the exhaust air.
The inclined arrangement of the fan
optimises the volume flow and reduces the accumulation of dirt. The resulting improved suction power is particularly suitable for heavy debris and rear suction.
The GRP tanks of the VIAJET 6 are absolutely corrosion-free and prevent limescale deposits. The arrangement of the tanks
lowers the centre of gravity, ensures optimum weight distribution, improves stability when tipping and provides sound insulation.
The optional 130 litre body tank for body-mounted engines supplements the equipment for small vehicle tanks. It is part of the standard equipment for swap systems.
The large V-chute has an extra wide and wear-resistant leaf flap. The optimised aerodynamics also make it possible to pick up large quantities of heavy sweepings or milled material. The wide wheels also run safely over rail grooves.
The pendulum-mounted, towed sweeping roller adapts perfectly to uneven road surfaces. Thanks to its large angle of attack, it also guides large quantities of heavy debris quickly and directly to the suction chute.
The very powerful, pushed disc brush can be swivelled out in several stages. The inclination can be adjusted pneumatically. The arrangement in front of the sweeping roller means that no dirt is left behind.
The floor pan made of V2A is raised at the side and, together with the large tipping angle, ensures good emptying and easy cleaning, even with milled material. The particularly high dirt compartment delays over-suction even when fully loaded. The water tank is separate from the container, which increases stability when tipping.
As with all VIAJETs, all switching elements and valves of the VIAJET 6 for compressed air, hydraulics and electrics are arranged in a central, easily accessible location. This allows service technicians to quickly find their way around when troubleshooting.
The dust and water-protected units simplify regular maintenance.
The control centre for the driver is not only clearly laid out, but can also be operated blindly thanks to tactile switches and controls. The driver can concentrate fully on the sweeping action and the traffic.
- Polluted air sucked in
- Circulating blast air
- Clean exhaust air
The FAUN air recirculation system
The FAUN recirculating air system constantly feeds the air sucked in from the hopper back to the blowing nozzle behind the suction chute. The already moistened and heated air - loaded with new dirt - is sucked back into the suction shaft and circulated. The recirculated air volume can be infinitely adjusted between 30 and 70 % depending on the application.
Only the relatively small amount of air that is not circulated flows out calmly under the machine. The fine dust emissions of FAUN sweepers with recirculation system are therefore approx. 50 % lower than those of purely suction sweepers. The clean exhaust air also does not stir up any dust, because it exits behind the sweeping units above the part of the carriageway that has already been cleaned.
By adding water to the blowing air, the road in the working area of the suction shaft can also be cleaned. In winter, it can also be used at temperatures as low as -5 °C with the addition of water in the suction shaft, as the circulating air warms up by approx. 15 °C and thus prevents the water in the suction shaft and container from freezing.
- 15-18 t chassis
- Modular cockpit
- Body motor, hydrostatic drives, hydraulic drive
- Innovative single-engine concept with Allison automatic transmission or TipMatic
- STREAMLINE blower with high suction power, less consumption
- Maintenance and service-friendly design
- Lowest fuel consumption, lowest maintenance costs
- From 1,900 litres of fresh water supply
AQUATHERM - Surface cleaning
Oil spill removal, industrial and large surface cleaning with surfactant and hot water up to 200 bar
FLATJET - SC200A
FLATJET HD washing bar mounted behind the SC200A surface extraction unit
Ambient lighting
Illumination of the entire vehicle surroundings via LED spotlights on the container roof
FLATJET behind the roller
FLATJET HD washing bar mounted behind the roller brush
Fine dust nozzle package
Fine dust nozzles on the sweeping units reduce dust pollution with minimal water consumption
Front plate broom
Front-mounted disc brush for weed control mounted on the front of the vehicle
Hydrostatic travel drive HS 2000
Powerful hydrostatic drive for speeds from 0.5 to 40 km/h
Interchangeable sweepers
Sweep superstructure in exchangeable design
Brochure FAUN VIAJET 6
Download as PDF
Sweepers overview brochure
Download as PDF