FAUN ROTOPRESS

The original: Often copied. Never equalled.
FAUN-Group-ROTOPRESS-SKYLIFT_header
Some classics are better bought as originals. The ROTOPRESS from FAUN is one of them. It is one of the most economical refuse collection vehicles for the removal of residual waste and household-type commercial waste.
With the appropriate lifter, the ROTOPRESS can empty all containers from 60 litres up to MGB 1,100 litres. The ROTOPRESS is particularly suitable for the removal of biowaste, which is homogeneously mixed and compacted in the rotary drum. Only one thing is in motion here, and that is the rotary drum. The ROTOPRESS therefore requires minimal maintenance and repairs. This makes it particularly economical.
Rotating icon
The container is emptied by changing the direction of rotation of the drum. The drum cleans itself without leaving any residue - there is no time-consuming cleaning in hard-to-reach places, corrosion is avoided and odour pockets cannot develop in the first place.
GOOD REASONS TO BUY ORIGINAL:
The right size for every application: small and manoeuvrable for urban areas or maximum payload on 4 axles.

Design panelling

Große Werbefläche ohne extra Werberahmen.

Half panelling

Saves more than just weight: the drum offers an ideal opportunity for creative advertising messages.

Rear or centre crane
For holding large containers and underfloor containers.
FAUN-Bin-Wash-Package
The container washer for on the go.

FAUN Control System (FCS)

Everything in view with the intuitive FAUN control system.

The little ROTOPRESS

All ROTOPRESS advantages in a width of 2.20 metres.
Manoeuvrable, high payload and short overhang:
8 m³ body volume, 3 m low, ~4 t payload.
Also for 2- and 4-wheel containers up to 770 litres.

Alternative drives

Drive concept ideally suited for all electric chassis. Already in use in several variants.

Brochure FAUN ROTOPRESS

Download as PDF

Neue Absaugung im Heck

Gut zugänglich, leichte Sichtprüfung bei geöffnetem Deckel vom Boden aus, geringer Reinigungsaufwand

Schrauben statt Schweißen

Die Verschleißschutzplatten der Pressschnecken sind geschraubt und halten jahrelang. Ein Austausch ist einfach, das spart Zeit und Geld

Robust und geräuscharm

Noch leiser mit durchgehendem Zahnkranz. Aus einem Stück gefertigt (optional).

Rundumbeleuchtung

Die Rundumbeleuchtung gewährleistet eine optimale Ausleuchtung des Arbeitsraums.

Dicht bis in die kleinste Ritze

Der Abfall setzt sich direkt in die Lücke zwischen Behälter und Deckel. Dadurch wird der Behälter zum Heckteil abgedichtet und nichts fällt raus.

Flüssigkeitssammelwanne

Neues Design für noch weniger Wartung und Reinigung, optional in Edelstahl erhältlich (optional).

„Powered“ Trittbretter

Unsere elektrisch angetriebenen Fußtritte erleichtern das Handling und schonen den Rücken (optional).

LED lighting (optional)

Die Beleuchtung ist optional in LED-Ausführung erhältlich.

Liquid-tight container base

Der Behälterboden ist so dicht, dass keine Flüssigkeiten auslaufen.