FAUN VIAJET 7

Strong on the construction site and on the road: power for cleanliness

The VIAJET 7 can be used for both municipal street cleaning and construction site applications. It is equipped with the patented FAUN air recirculation system as standard, which guarantees the best emission values in the exhaust air.

FAUN Group sweeper VIAJET-7_1

The inclined arrangement of the fan
optimises the volume flow and reduces the accumulation of dirt. The resulting improved suction power is particularly suitable for heavy debris and rear suction.

Thanks to the internal cylinders and the closed guide rail made of highly wear-resistant steel, there are no openings in the rear section through which waste can fall out.

The optional 130 litre body tank for body-mounted engines supplements the equipment for small vehicle tanks. It is part of the standard equipment for swap systems.

The large V-chute has an extra wide and wear-resistant leaf flap. The optimised aerodynamics also make it possible to pick up large quantities of heavy sweepings or milled material.
The wide wheels also run safely over rail grooves.

The pendulum-mounted, towed sweeping roller adapts perfectly to uneven road surfaces. Thanks to its large angle of attack, it also guides large quantities of heavy debris quickly and directly to the suction chute.

The very powerful, pushed disc brush can be swivelled out in several stages. The inclination can be adjusted pneumatically. The arrangement in front of the sweeping roller means that no dirt is left behind.

The floor pan made of V2A is raised at the side and, together with the large tipping angle, ensures good emptying and easy cleaning, even with milled material. The particularly high dirt compartment delays over-suction even when fully loaded. The water tank is separate from the container, which increases stability when tipping.

As with all VIAJETs, all switching elements and valves of the VIAJET 7 for compressed air, hydraulics and electrics are arranged in a central, easily accessible location. This allows service technicians to quickly find their way around when troubleshooting. The dust and water-protected units simplify regular maintenance.

The control centre for the driver is not only clearly laid out, but can also be operated blindly thanks to tactile switches and controls. The driver can concentrate fully on the sweeping action and the traffic.

The FAUN air recirculation system

The FAUN recirculating air system constantly feeds the air sucked in from the hopper back to the blowing nozzle behind the suction chute. The already moistened and heated air - loaded with new dirt - is sucked back into the suction shaft and circulated. The recirculated air volume can be infinitely adjusted between 30 and 70 % depending on the application.

Only the relatively small amount of air that is not circulated flows out calmly under the machine. The fine dust emissions of FAUN sweepers with recirculation system are therefore approx. 50 % lower than those of purely suction sweepers. The clean exhaust air also does not stir up any dust, because it exits behind the sweeping units above the part of the carriageway that has already been cleaned.

By adding water to the blowing air, the road in the working area of the suction shaft can also be cleaned. In winter, it can also be used at temperatures as low as -5 °C with the addition of water in the suction shaft, as the circulating air warms up by approx. 15 °C and thus prevents the water in the suction shaft and container from freezing.

GOOD REASONS TO BUY ORIGINAL:

AQUATHERM - Surface cleaning

Oil spill removal, industrial and large surface cleaning with surfactant and hot water up to 200 bar

Surface extraction - SC200U

Surface extraction as a substructure variant within the vehicle contour

FLATJET - SC200A

FLATJET HD washing bar mounted behind the SC200A surface extraction unit

Ambient lighting

Illumination of the entire vehicle surroundings via LED spotlights on the container roof

FLATJET behind the roller

FLATJET HD washing bar mounted behind the roller brush

TURBOJET - SC200A

TURBOJET HD rotating nozzle bar mounted behind the SC200A surface extraction unit

Front plate broom

Front-mounted disc brush for weed control mounted on the front of the vehicle

Third broom behind the front wheel

Additional brush behind the front wheel, pneumatically telescopic

Interchangeable sweepers

Sweep superstructure in exchangeable design

Brochure FAUN VIAJET 7

Download as PDF

en_GBEnglish (UK)